3Com V6100, User Manual Manual, Page: 98 / 496

98
V6100 and V7122 User Guide
Figure 38 IP to Trunk Group Routing Table
2
In the ‘IP to Tel Routing Mode’ field, select the IP to Tel routing mode (see Table 51 ).
3
In the ‘Routing Index’ drop-down list, select the range of entries that you want to edit (up
to 24 entries can be configured).
4 Configure the IP to Trunk Group Routing table according to Table 32 .
5 Click the Submit button to save your changes.
6 To save the changes so they are available after a power fail, see Save Configuration .
Table 32
IP to Trunk Group Routing Table
Parameter Description
Destination Phone Prefix Each entry in the Destination Phone Prefix fields represents a
called telephone number prefix. The prefix can be 1 to 49 digits
long. An asterisk (*) represents all numbers.
Source Phone Prefix Each entry in the Source Phone Prefix fields represents a calling
telephone number prefix. The prefix can be 1 to 49 digits long. An
asterisk (*) represents all numbers.
Source IP Address
Each entry in the Source IP Address fields represents the source IP
address of an IP
Æ
Tel call (obtained from the Contact header in the
INVITE message).
The source IP address can include the ‘x’ wildcard to
represent single digits. For example: 10.8.8.xx
represents all the addresses between 10.8.8.10 to
10.8.8.99.