3Com V6100, User Manual Manual, Page: 434 / 496

434
V6100 and V7122 User Guide
Table 94 acBoardTemperatureAlarm Alarm Trap
Alarm: acBoardTemperatureAlarm (doesn’t apply to the TP-260 board)
OID: 1.3.6.1.4.1.5003.9.10.1.21.2.0.3
Default Severity Critical
Event Type: equipmentAlarm
Probable Cause: temperatureUnacceptable (50)
Alarm Text: Board temperature too high
Status Changes:
Condition: Temperature is above 60 degrees C (140 degrees F)
Alarm status: Critical
Condition: After raise, temperature falls below 55 degrees C (131 degrees F)
Alarm status: Cleared
Corrective Action: Inspect the system. Determine if all fans in the system are properly operating.
Table 95 acBoardEvResettingBoard Alarm Trap
Alarm: acBoardEvResettingBoard
OID: 1.3.6.1.4.1.5003.9.10.1.21.2.0.5
Default Severity
Critical
Event Type: equipmentAlarm
Probable Cause: outOfService (71)
Alarm Text:
User resetting board
Status Changes:
Condition: When a soft reset is triggered via the Web interface or SNMP.
Alarm status: Critical
Condition: After raise
Alarm status: Status stays critical until reboot. A clear trap is not sent.
Corrective Action: A network administrator has taken action to reset the device. No corrective
action is required.