3Com V6100, User Manual Manual, Page: 253 / 496

V6100 and V7122 User Guide
253
Attribute
Number Attribute
Name VSA
No.
Purpose
Value
Format
Sample
AAA
5
other number failed)
44
Acct-Session-
Id
A unique accounting
identifier – match start &
stop
String Stop Acc
RADIUS Server Messages
In Figure 86 , non-standard parameters are preceded with brackets.
Figure 86
Accounting Example
Accounting-Request (361)
user-name = 111
acct-session-id = 1
nas-ip-address = 212.179.22.213
nas-port-type = 0
acct-status-type = 2
acct-input-octets = 4841
acct-output-octets = 8800
acct-session-time = 1
acct-input-packets = 122
acct-output-packets = 220
called-station-id = 201
calling-station-id = 202
// Accounting non-standard parameters:
(
4
9
23
33) h323-gw-id =
(
4
9
23
23) h323-remote-address = 212.179.22.214
(
4
9
23
1) h323-ivr-out = h323-incoming-conf-id:02102944 600a1899 3fd61009
0e2f3cc5
(
4
9
23
30) h323-disconnect-cause = 22 (0x16)
(
4
9
23
27) h323-call-type = VOIP
(
4
9
23
26) h323-call-origin = Originate
(
4
9
23
24) h323-conf-id = 02102944 600a1899 3fd61009 0e2f3cc5
Trunk to Trunk Routing Example
This example describes two V7122 gateways, each interface with the PSTN through four E1
spans. Gateway ‘A’ is configured to route all incoming Tel
Æ
IP calls to gateway ‘B’. Gateway
‘B’ generates calls to PSTN on the same E1 Trunk as the call was originally received (in
gateway ‘A’).
ƒ
Gateway ‘A’ IP address is 192.168.3.50
ƒ
Gateway ‘B’ IP address is 192.168.3.51