3Com V6100, User Manual Manual, Page: 275 / 496

V6100 and V7122 User Guide
275
Since a default gateway is available only for the Media network, for the V7122 to
be able to communicate with an external device / network on its OAM and Control
networks, IP routing rules must be used.
The values provided in Integrating Using the Embedded Web Server and
Integrating Using the ini File are sample parameter values only and are to be
replaced with actual values appropriate to your system.
Integrating Using the Embedded Web Server
To integrate the V7122 into a VLAN and multiple IPs network using the Embedded Web
Server:
1
Access the Embedded Web Server ( Accessing the Embedded Web Server ).
2
Use the Software Upgrade Wizard ( Software Upgrade Wizard ) to load and burn the
firmware version to the V7122 (VLANs and multiple IPs support is available only when
the firmware is burned to flash).
3 Configure the VLAN parameters by completing the following steps:
ƒ
Open the ‘VLAN Settings’ screen ( Advanced Configuration menu > Network
Settings > VLAN Settings option); the ‘VLAN Settings’ screen is displayed.
ƒ
Modify the VLAN parameters to correspond to the values shown in Figure 89 .
Figure 89 Example of the VLAN Settings Screen
ƒ
Click the Submit button to save your changes.
4
Configure the multiple IP parameters by completing the following steps:
ƒ
Open the ‘IP Settings’ screen ( Advanced Configuration menu > Network Settings
> IP Settings option); the ‘IP Settings’ screen is displayed.
ƒ
Modify the IP parameters to correspond to the values shown in Figure 90 . Note that
the OAM, Control and Media Network Settings parameters appear only after you
select the option ‘Multiple IP Networks’ in the field ‘IP Networking Mode’.