3Com V6100, User Manual Manual, Page: 177 / 496

V6100 and V7122 User Guide
177
ini File Field Name
Web Parameter Name
Valid Range and Description
HTTPSPort Determine the local Secured HTTPS port of the device.
The valid range is 1 to 65535 (other restrictions may apply within this range).
The default port is 443.
WebAuthMode
[HTTP Authentication Mode]
Determines the authentication mode for the Embedded Web Server.
0 = Basic authentication (clear text) is used (default).
1 = Digest authentication (MD5) is used.
2 = Digest authentication (MD5) is used for HTTP, and basic authentication
is used for HTTPS.
Note that when RADIUS login is enabled (WebRADIUSLogin = 1), basic
authentication is forced.
HTTPSRequireClientCertifi
cate Requires client certificates for HTTPS connection. The client certificate must
be preloaded to the gateway, and its matching private key must be installed
on the managing PC. Time and date must be correctly set on the gateway,
for the client certificate to be verified.
0 = Client certificates are not required (default).
1 = Client certificates are required.
HTTPSRootFileName Defines the name of the HTTPS trusted root certificate file to be loaded via
TFTP. The file must be in base64-encoded PEM (Privacy Enhanced Mail)
format.
The valid range is a 47-character string.
This parameter is only relevant when the gateway is loaded via
BootP/TFTP. For information on loading this file via the Embedded
Web Server, see the Security section in the User Guide.
HTTPSPkeyFileName
[Security Settings >
Certificates]
Defines the name of a private key file (in unencrypted PEM format) to be
loaded from the TFTP server.
HTTPSCertFileName Defines the name of the HTTPS server certificate file to be loaded via TFTP.
The file must be in base64-encoded PEM format.
The valid range is a 47-character string.
This parameter is only relevant when the gateway is loaded via
BootP/TFTP. For information on loading this file via the Embedded
Web Server, see the Security section in the User Guide.
Internal Firewall Parameters
AccessList_Source_IP
[Source IP]
IP address (or DNS name) of source network, or a specific host.
AccessList_Net_Mask
[Mask]
IP network mask. 255.255.255.255 for a single host or the appropriate value
for the source IP addresses.
The IP address of the sender of the incoming packet is bitwise ANDed with
this mask and then compared to the field ‘Source IP’.
AccessList_Start_Port
AccessList_End_Port
[Local Port Range]
The destination UDP/TCP ports (on this device) to which packets are sent.
The valid range is 0 to 65535.
When the protocol type isn’t TCP or UDP, the entire range must be
provided.