3Com V6100, User Manual Manual, Page: 110 / 496

110
V6100 and V7122 User Guide
Mode Description
Cyclic Descending Select the next available channel in descending cycle order. Always
select the next lower channel number in the Trunk Group. When the
gateway reaches the lowest channel number in the Trunk Group, it
selects the highest channel number in the Trunk Group and then start
descending again.
Descending Select the highest available channel. Always start at the highest
channel number in the Trunk Group and if that channel is not available,
select the next lower channel.
Cyclic Ascending First select the gateway port according to the called number (see the
note below). If the called number isn’t found, then select the next
available channel in ascending cyclic order. Note that if the called
number is found, but the port associated with this number is busy, the
call is released.
The internal numbers of the gateway’s B-channels are defined in the ‘Trunk Group
Table’ under the ‘Phone Number’ column. For detailed information on the ‘Trunk
Group Table’, see
Configuring the Trunk Group Table ).
Advanced Configuration
Use this menu to set the gateway’s advanced configuration parameters (for advanced users
only).
Configuring the Network Settings
From the Network Settings you can:
ƒ
Configure the IP Settings.
ƒ
Configure the Application Settings.
ƒ
Configure the NFS Settings (see Configuring the NFS Settings ).
ƒ
Configure the IP Routing Table (see Configuring the IP Routing Table ).
ƒ
Configure the VLAN Settings.
Configuring the NFS Settings
Network File System (NFS) enables the V7122 to access a remote server’s shared files and
directories and to handle them as if they’re located locally. A file system, the NFS is
independent of machine types, OSs, and network architectures. Up to five different NFS file
systems can be configured.
NFS is utilized by the V7122 to load the cmp , ini and configuration files via the Automatic
Update mechanism (see Automatic Update Mechanism ).