3Com V6100, User Manual Manual, Page: 437 / 496

V6100 and V7122 User Guide
437
Component: AlarmManager#0
The source varbind text for all the alarms under this component is
Board# <n >/AlarmManager#0 where n is the slot number.
Table 100 acActiveAlarmTableOverflow Alarm Trap
Alarm: acActiveAlarmTableOverflow
OID:
1.3.6.1.4.15003.9.10.1.21.2.0.12
Default Severity Major
Event Type: processingErrorAlarm
Probable Cause:
resourceAtOrNearingCapacity (43)
Alarm Text: Active alarm table overflow
Status Changes:
Condition: Too many alarms to fit in the active alarm table
Alarm status: major
Condition: After raise
Alarm status: Status stays major until reboot. A clear trap is not sent.
The status stays major until reboot as it denotes a possible loss of
information until the next reboot. If an alarm is raised when the table is full, it
is possible that the alarm is active, but does not appear in the active alarm
table.
Corrective Action: Some alarm information may have been lost, but the ability of the device to
perform its basic operations has not been impacted. A reboot is the only way
to completely clear a problem with the active alarm table. Contact your first-
level group.
Component: EthernetLink#0
The source varbind text for all the alarms under this component is
Board# <n >/EthernetLink#0 where n is the slot number.
This trap relates to the Ethernet Link Module (the #0 numbering doesn’t apply to the physical
Ethernet link). This trap doesn’t apply to TP-260 boards.