3Com V6100, User Manual Manual, Page: 208 / 496

208
V6100 and V7122 User Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
RemoveCLIWhenRestric
ted
[Remove CLI when
Restricted]
Determines (for IP to Tel calls) whether the Calling Number IE and Calling
Name IE are removed from the outgoing ISDN Setup message if the
presentation is set to Restricted.
0 = IE aren’t removed (default).
1 = IE are removed.
ScreeningInd2ISDN
[Send Screening Indicator
to ISDN]
Overwrites the screening indicator of the calling number for IP
Æ
Tel (ISDN)
calls.
-1 = Not Configured (interworking from IP to ISDN) (default).
0 = User provided, not screened.
1 = User provided, verified and passed.
2 = User provided, verified and failed.
3 = Network provided.
ProgressIndicator2ISDN
_ID
[Progress Indicator to
ISDN]
ID = Trunk number (0-7).
0, 1 or 8
-1 = Not configured (default).
If set to ‘0’ PI is not sent to ISDN
If set to ‘1’ or ‘8’ the PI value is sent to PSTN in Q.931/Proceeding and Alerting
messages.
If not configured, the PI in ISDN messages is set according to the ‘Play
Ringback to Tel’ parameter.
Usually if PI = 1 or 8, the PSTN/PBX cuts through the audio channel without
playing local Ringback tone, enabling the originating party to hear remote Call
Progress Tones or network announcements
ProgressIndicator2ISDN
[Progress Indicator to
ISDN] Obsolete parameter, use ProgressIndicator2ISDN_ID instead.
ProgressIndicator2IP
[Progress Indicator to IP]
-1 = (Not configured) for ISDN spans, the PI that is received in ISDN
Proceeding, Progress and Alert messages is used as described in the
following options (default).
0 = (No PI) For IP
Æ
Tel call, the gateway sends ‘180 Ringing’ SIP response to
IP after receiving ISDN Alert, or (for CAS) after placing a call to PBX/PSTN.
8, 1 = For IP
Æ
Tel call, if ‘EnableEarlyMedia=1’, the gateway sends ‘183
session in progress’ m SDP, after a call is placed to PBX/PSTN over
the trunk. This is used to cut through voice path, before remote party answers
the call, enabling the originating party to listen to network Call Progress Tones
(such as Ringback tone or other network announcements).
PIForDisconnectMsg_ID
[Set PI in Rx Disconnect
Message]
ID = Trunk number (0-7).
Defines the gateway’s behavior when a Disconnect message is received from
the ISDN before a Connect message was received.
-1 (Not configured) = Sends a 183 message according to the received PI in the
ISDN Disconnect message. If PI = 1 or 8, the gateway sends a 183 response,
enabling the PSTN to play a voice announcement to the IP side. If there isn’t a
PI in the Disconnect message, the call is released (default).
0 = Do not send a 183 message to IP. The call is released.
1, 8 = Sends 183 message to IP.
PIForDisconnectMsg
[Set PI in Rx Disconnect
Message] Obsolete parameter, use PIForDisconnectMsg_ID instead.