3Com V6100, User Manual Manual, Page: 145 / 496

V6100 and V7122 User Guide
145
As you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until ‘FINISH’).
Figure 76
Load an ini File Screen
6
In the ‘Load an ini File’ screen, you can now choose to either:
a)
Click Browse and navigate to the ini file; the check box ‘Use existing configuration’,
by default checked, becomes unchecked. Click Send File ; the ini file is loaded to the
V7122 and you’re notified as to a successful loading.
b) Ignore the Browse button (its field remains undefined and the check box ‘Use
existing configuration’ remains checked by default).
c) Ignore the Browse button and uncheck the ‘Use existing configuration’ check box; no
ini file is loaded, the V7122 uses its factory-preconfigured values.
7
You can now choose to either:
a)
Click Cancel ; the V7122 resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
b)
Click Reset ; the V7122 resets, utilizing the new cmp and ini file you loaded up to now
as well as utilizing the other configuration files.
c) Click Back ; the ‘Load a cmp file’ screen is reverted to; see Figure 74 .
d) Click Next ; the ‘Load a CPT File’ screen opens (see Figure 77 ); Loading a new CPT
file or any other auxiliary file listed in the Wizard is optional.