3Com V6100, User Manual Manual, Page: 188 / 496

188
V6100 and V7122 User Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
RegistrationTimeDivider
[Re-registration Timing (%)]
Defines the re-registration timing (in percentage). The timing is a
percentage of the re-register timing set by the Registration server.
The valid range is 50 to 100. The default value is 50.
For example: If ‘RegistrationTimeDivider = 70’ (%) and Registration Expires
time = 3600, the gateway resends its registration request after 3600 x 70%
= 2520 sec.
RegistrationRetryTime
[Registration Retry Time]
Defines the time period (in seconds) after which a Registration request is
resent if registration fails with 4xx, or there is no response from the
Proxy/Registrar. The default is 30 seconds. The range is 10 to 3600.
NumberOfActiveDialogs Defines the maximum number of active SIP dialogs that are not call related
( i.e., REGISTER and SUBSCRIBE ) . This parameter is used to control the
Registration / Subscription rate.
The valid range is 1 to 20. The default value is 20.
PrackMode
[PRACK Mode]
PRACK mechanism mode for 1xx reliable responses:
0 = Disabled.
1 = Supported (default).
2 = Required.
The Supported and Required headers contain the ‘100rel’
parameter.
The V7122 sends PRACK message if 180/183 response is
received with ‘100rel’ in the Supported or the Required
headers.
AssertedIdMode
[Asserted Identity Mode]
0 = None (default).
1 = P-asserted.
2 = P-preferred.
The Asserted ID mode defines the header that is used in the generated
INVITE request. The header also depends on the calling Privacy: allowed
or restricted.
The P-asserted (or P-preferred) headers are used to present the originating
party’s Caller ID. The Caller ID is composed of a Calling Number and
(optionally) a Calling Name.
P-asserted (or P-preferred) headers are used together with the Privacy
header. If Caller ID is restricted, the ‘Privacy: id’ is included. Otherwise, for
allowed Caller ID the ‘Privacy: none’ is used. If Caller ID (received from
PSTN) is restricted, the From header is set to
<anonymous@anonymous.invalid>.
UseTelURIForAssertedID Determines the format of the URI in the P-Asserted and P-Preferred
headers.
0 = ‘sip:’ (default).
1 = ‘tel:’.
EnableRPIheader
[Enable Remote Party ID]
Enable Remote-Party-ID (RPI) headers for calling and called numbers for
Tel
Æ
IP calls.
0 = Disabled (default).
1 = RPI headers are generated in SIP INVITE messages for both called
and calling numbers.
IsUserPhone
[Use “user=phone” in SIP
URL]
0 = Doesn’t use ‘user=phone’ string in SIP URI.
1 = ‘user=phone’ string is part of the SIP URI (default).