![background image](http://html1.mh-extra.com/html/3com/v6100/v6100_user-manual-manual_3139483223.webp)
V6100 and V7122 User Guide
223
ini File Field Name
Web Parameter Name
Valid Range and Description
TerminationSide_x
[ISDN Termination Side]
Same as the description for parameter ‘TerminationSide’ for a specific trunk
ID (x = 0 to 7).
ClockMaster
[Clock Master]
0 = Recover clock from the E1/T1 line (default)
1 = The clock is generated by the gateway
For detailed information on configuring the gateway’s clock settings,
V7122
Clock Settings
.
ClockMaster_x
[Clock Master]
Same as the description for parameter ‘ClockMaster’ for a specific trunk ID
(x = 0 to 7).
TDMBusClockSource
[TDM Bus Clock Source]
1 = Generate clock from local source (default).
4 = Recover clock from PSTN line.
For detailed information on configuring the gateway’s clock settings, see
V7122 Clock Settings
.
TDMBusPSTNAutoClockE
nable
[TDM Bus PSTN Auto Clock]
0 = Recover the clock from first E1/T1 line (default)
1 = Recover the clock from any connected slave E1/T1 line
This parameter is relevant only if ‘TDMBusClockSource = 4’
TDMBusLocalReference
[TDM Bus Local Reference]
0 to 7 (default = 0)
Physical Trunk ID from which the gateway recovers its clock. Applicable only
if ‘TDMBusClockSource = 4’ and ‘TDMBusPSTNAutoClockEnable = 0’
LineCode
[Line Code]
0 = use B8ZS line code (for T1 trunks only) default.
1 = use AMI line code.
2 = use HDB3 line code (for E1 trunks only).
Use to select B8ZS or AMI for T1 spans, and HDB3 or AMI for E1 spans.
LineCode_x
[Line Code]
Same as the description for parameter ‘LineCode’ for a specific trunk ID (x =
0 to 7).
BchannelNegotiation
[B-channel Negotiation]
Determines the ISDN B-Channel negotiation mode.
0 = Preferred
1 = Exclusive (default)
Applicable to ISDN protocols.
NFASGroupNumber_x
[NFAS Group Number]
0 = Non NFAS trunk (default)
1 to 4 = NFAS group number
Indicates the NFAS group number (NFAS member) for the selected trunk.
‘x’ identifies the Trunk ID (0-7).
Trunks that belong to the same NFAS group have the same number.
With ISDN Non-Facility Associated Signaling you can use single D-channel
to control multiple PRI interfaces.
Applicable only to T1 ISDN protocols.
Summary of Contents for V6100
