3Com V6100, User Manual Manual, Page: 474 / 496

474
V6100 and V7122 User Guide
Linux™ SUSE Installation Instructions
Perform the following five stages for the Linux
TM
SUSE Installation. (Some SUSE
distributions may vary slightly).
Additional Requirement for Linux™ SUSE Installation
In order to install Linux™ SUSE, a terminal emulation program is needed which supports:
ƒ
ANSI colors (or LinuxTM emulation)
ƒ
Changing terminal size (to 132x47).
The Tera Term™ program may be used. See
http://hp.vector.co.jp/authors/VA002416/teraterm.html
Stage 1: Obtaining the ISO Image
In order to obtain an updated ISO image, create it using the steps detailed in the section
below.
To create an ISO image using an ISO editor utility, follow these 5 steps:
1
Insert the 1st installation disk of the Linux™ SUSE distribution into the CD-ROM drive of
the Windows™ PC.
2 Using Internet Explorer, download a utility that allows editing of an ISO image. The
WinISO™ program (
http://www.winiso.com/download.htm ) may be used.
3
Start WinISO™ and from the main menu, select Actions – Make ISO from CDROM .
Figure 177 WinISO - Actions Screen
4
Create a Partner Install folder on your hard drive. Select boot.iso as the output
filename and then click on Make .