3Com V6100, User Manual Manual, Page: 130 / 496

130
V6100 and V7122 User Guide
4 Click the Submit button to save your changes.
5
To save the changes so they are available after a power fail, see Save Configuration .
Figure 61 SNMP Managers Table Screen
If you clear a checkbox and click Submit, all settings in the same row revert to their
defaults.
Configuring the SNMP Community Strings
Use the SNMP Community Strings table to configure up to five read-only and up to five read
/ write SNMP community strings, and to configure the community string that is used for
sending traps. For detailed information on SNMP community strings, see
SNMP Community
Names .
To configure the SNMP Community Strings:
1
Access the ‘Management Settings’ screen ( Advanced Configuration menu >
Management Settings ); the ‘Management Settings’ screen is displayed.
2 Open the SNMP Community Strings screen by clicking the arrow sign (-->) to the right of
the SNMP Community Strings label; the SNMP Community Strings screen is displayed
(
Figure 62 ).
3 Configure the SNMP Community Strings parameters according to Table 47 .
4
Click the Submit button to save your changes.
5
To save the changes so they are available after a power fail, see Save Configuration .