3Com V6100, User Manual Manual, Page: 416 / 496

416
V6100 and V7122 User Guide
Figure 137 Call Progress Tones Conversion Screen
3
Click the Select File… button that is in the ‘Call Progress Tone File’ box.
4
Navigate to the folder that contains the CPT ini file you want to convert.
5
Click the ini file and click the Open button; the name and path of both the ini file and the
(output) dat file appears in the fields below the Select File button.
6 Enter the Vendor Name, Version Number and Version Description in the corresponding
required fields under the ‘User Data’ section.
ƒ
The maximum length of the Vendor field is 256 characters.
ƒ
The format of the Version field is composed of two integers separated by a period ‘.’
(e.g., 1.2, 23.4, 5.22).
ƒ
The maximum length of the Version Description field is 256 characters.
7
The default value of the CPT Version drop-down list is Version 3. Do one of the following:
ƒ
If the software version you are using is prior to version 4.4, select Version 1 (to
maintain backward compatibility).
ƒ
If the software version you are using is 4.4, select Version 2.
ƒ
Otherwise, leave the value at its default.
8 Check the ‘Use dBm units for Tone Levels’ check box. Note that the levels of the Call
Progress Tones (in the CPT file) must be in -dBm units.
9
Click the Make File button; you’re prompted that the operation (conversion) was
successful.
10
Close the application.