![background image](http://html1.mh-extra.com/html/3com/v6100/v6100_user-manual-manual_3139483285.webp)
V6100 and V7122 User Guide
285
C
HAPTER
11:
A
DVANCED
S
YSTEM
C
APABILITIES
Restoring Networking Parameters to their Initial State
You can use the ‘Reset’ button to restore the V7122 / TP-1610 and V6100 networking
parameters (described in
Table 26
) to their factory default values and to reset the username
and password.
The gateway returns to the software version burned in flash. This process also
restores the gateway’s parameters to their factory settings. Therefore, you must
load your previously backed-up
ini
file, or the default
ini
file (received with the
software kit) to set them to their correct values
This option is currently supported (for V7122 and TP-1610) on one media gateway module
(trunks 1-8) only.
To restore the networking parameters of the V7122 and TP-1610 to their initial state:
1
Disconnect the V7122 from the power and network cables.
2
Reconnect the power cable; the gateway is powered up. After approximately 45 seconds
the ACT LED blinks for about 4 seconds.
3
While the ACT LED is blinking, press shortly on the reset button (located on the front
panel); the gateway resets a second time and is restored with factory default parameters
(username: ‘Admin’, password: ‘Admin’).
4
Reconnect the network cable.
5
Assign the V7122 IP address (see
Assigning the V7122 IP Address
).
6
Load your previously backed-up
ini
file, or the default
ini
file (received with the software
kit). To load the
ini
file via the Embedded Web Server, see
Restoring and Backing up the
Gateway Configuration
.
To restore the networking parameters of the V6100 to their initial state:
1
Press in the ‘Reset’ button uninterruptedly for a duration of more than six seconds; the
gateway is restored to its factory settings (username: ‘Admin’, password: ‘Admin’).
2
Assign the V6100 IP address (see
Assigning the V7122 IP Address
).
3
Load your previously backed-up
ini
file, or the default
ini
file (received with the software
kit). To load the
ini
file via the Embedded Web Server, see Section
Restoring and
Backing up the Gateway Configuration
.
Summary of Contents for V6100
