![background image](http://html1.mh-extra.com/html/3com/v6100/v6100_user-manual-manual_3139483108.webp)
108
V6100 and V7122 User Guide
Parameter Description
Phone Number In each of the Phone Number fields, enter the first number in an ordered sequence that is
assigned to the range of channels defined in the adjacent ‘Channels’ field.
This field is optional. The logical numbers defined in this field are used when
an incoming PSTN / PBX call doesn’t contain the calling number or called
number (the latter being determined by the parameter
‘ReplaceEmptyDstWithPortNumber’); these numbers are used to replace
them.
These logical numbers are also used for B-channel allocation for IP to Tel calls, if the trunk
group’s ‘Channel Select Mode’ is set to ‘By Phone Number’.
Trunk Group ID In each of the Trunk Group ID fields, enter the trunk group ID (1-99) assigned to the
channels. The same trunk group ID can be used for more than one group of channels.
Trunk group ID is used to define a group of common behavior channels that are used for
routing IP to Tel calls. If an IP to Tel call is assigned to a trunk group, the call is routed to the
channel or channels that correspond to the trunk group ID.
You can configure the Trunk Group Settings table to determine the method in which new
calls are assigned to channels within the trunk groups (see
Configuring the Trunk Group
Settings
).
You must configure the IP to Trunk Group Routing Table (assigns incoming IP
calls to the appropriate trunk group). If you do not configure the IP to Trunk
Group Routing Table, calls do not complete.
For information on how to configure this table, see
IP to Trunk Group Routing Table
.
Profile ID
Enter the number of the Tel profile that is assigned to the B-channels defined in the
‘Channels’ field.
Configuring the Trunk Group Settings
The Trunk Group Settings Table is used to determine the method in which new calls are
assigned to B-channels within each trunk group. If such a rule doesn’t exist (for a specific
Trunk group), the global rule, defined by the Channel Select Mode parameter (Protocol
Definition > General Parameters), applies.
To configure the Trunk Group Settings table:
1
Open the ‘Trunk Group Settings’ screen (
Protocol Management
menu >
Trunk Group
Settings
); the ‘Trunk Group Settings’ screen is displayed.
Summary of Contents for V6100
