![background image](http://html1.mh-extra.com/html/3com/v6100/v6100_user-manual-manual_3139483174.webp)
174
V6100 and V7122 User Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
ExtBootPReqEnable
0 = Disable (default).
1 = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the BootP
request to provide device-related initial startup information such as board
type, current IP address, software version, etc. For a full list of the vendor
specific Information fields, see
1
Using BootP
.
The BootP/TFTP configuration utility displays this information in the ‘Client
Info’ column (see
Figure 131
).
This option is not available on DHCP servers.
Web and Telnet Parameters
Table 44
Web and Telnet Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
WebAccessList_x
[Web and Telnet Access List
Screen]
Defines up to ten IP addresses that are permitted to access the gateway’s
Web and Telnet interfaces. Access from an undefined IP address is denied.
This security feature is inactive (the gateway can be accessed from any IP
address) when the table is empty.
For example:
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
The default value is 0.0.0.0 (the gateway can be accessed from any IP
address).
WebRADIUSLogin
[Use RADIUS for
Web/Telnet Login]
Uses RADIUS queries for Web and Telnet interface authentication.
0 = Disabled (default).
1 = Enabled.
When enabled, logging to the gateway’s Web and Telnet embedded servers
is performed via a RADIUS server. The gateway contacts a predefined
server and verifies the given username and password pair against a remote
database, in a secure manner.
The parameter ‘EnableRADIUS’ must be set to 1.
RADIUS authentication requires HTTP basic authentication,
meaning the username and password are transmitted in clear text
over the network. Therefore, users are recommended to set the
parameter ‘HttpsOnly = 1’ to force the use of HTTPS, since the
transport is encrypted.
DisableWebTask
0 = Enable Web management (default).
1 = Disable Web management.
ResetWebPassword
Resets the username and password of the primary and secondary accounts
to their defaults.
0 = Password and username retain their values (default).
1 = Password and username are reset (for the default username and
password, see
Table 26
).
The username and password cannot be reset from the Web (i.e.,
via AdminPage or by loading an ini file).
Summary of Contents for V6100
