3Com Router 3031, Command Reference Manual

Page: 405 / 838

DHCP Public Configuration Commands 405
Example
Configure the IP address corresponding to the host name router1 as 10.110.0.1.
[3Com] ip host router1 10.110.0.1
Configure the IP address corresponding to the host name router2 as 10.110.0.2.
[3Com] ip host router2 10.110.0.2
Configure to assign the IP address 10.110.0.3 to the host name router3.
[3Com] ip host router3 10.110.0.3
Remove the IP address 10.110.0.2 corresponding to the host name router2.
[3Com] undo ip host router2 10.110.0.2
DHCP Public
Configuration
Commands
dhcp enable Syntax
dhcp enable
undo dhcp enable
View
System view
Parameter
None
Description
Using the dhcp enable command, you can enable DHCP services. Using the undo
dhcp enable command, you can disable DHCP services.
By default, DHCP services are enabled.
Before you can configure DHCP, you must enable DHCP services. This
configuration is essential to both DHCP server and DHCP relay.
Example
Enable DHCP services on current router.
[3Com] dhcp enable
dhcp select (in Interface
View)
Syntax
dhcp select { global | interface | relay }