Basic Configuration Commands
763
Out Octets of Mpls interface is: 0
Out Packets of Mpls interface is: 0
Out Errors of Mpls interface is: 0
Out Discard Packets of Mpls interface is: 0
The statistics of interface : Serial6/0/1
The statistics of interface in :
In Octets of Mpls interface is: 0
In Packets of Mpls interface is: 0
In Errors of Mpls interface is: 0
In Discard Packets of Mpls interface is: 0
The statistics of interface out :
Out Octets of Mpls interface is: 0
Out Packets of Mpls interface is: 0
Out Errors of Mpls interface is: 0
Out Discard Packets of Mpls interface is: 0
Table 1
Description of the Output Information of the Display mpls statistics interface all
Command
lsp-trigger
Syntax
lsp-trigger { all | ip-prefix ip-prefix }
undo lsp-trigger { all | ip-prefix ip-prefix }
View
MPLS view
Parameter
all: Sets up LSPs at any routes.
ip-prefix: Sets up LSPs only at those routes with the specified IP prefix.
ip-prefix: IP address prefix list, in the range of 1~19.
Description
Using the lsp-trigger command, you can configure topology-triggered LSP creation
policy. Using the undo lsp-trigger command, you can remove the filtering
conditions specified by parameters and enable no route to trigger LSP creation.
By default, all kinds of routing protocols are filtered out.
If no topology-triggered policy is configured, LSPs can be established at all host
routes with 32-bit masks.
Field
Description
In Octets of Mpls interface is: 0
Bytes coming from the interface
In Packets of Mpls interface is: 0
Packets coming from the interface
In Errors of Mpls interface is: 0
Packet processing errors coming from the
interface
In Discard Packets of Mpls interface is: 0
Discarded packets coming from the interface
Out Octets of Mpls interface is: 0
Bytes sent from the interface
Out Packets of Mpls interface is: 0
Packets sent from the interface
Out Errors of Mpls interface is: 0
Packet processing errors sent from the
interface
Out Discard Packets of Mpls interface is: 0
Discarded packets sent from the interface
Summary of Contents for Router 3031
Page 6: ......
Page 686: ...686 CHAPTER 6 ROUTING PROTOCOL...
Page 758: ...758 CHAPTER 7 MULTICAST COMMON CONFIGURATION COMMANDS...