3Com Router 3031, Command Reference Manual

Page: 537 / 838

Display Commands of the Routing Table 537
View
Any view
Parameter
■
ip_address1, ip_address2: Destination IP address in dotted decimal notation.
ip_address1 and ip_address2 determine one address range together to display
the route in this address range.
■
mask1, mask2: IP address mask, length in dotted decimal notation or integer
form.
■
verbose: With the verbose parameter, this command displays the verbose
information of both the active and inactive routes. Without the parameter, this
command only displays the summary of active routes.
Description
Using the display ip routing-table ip_address1 ip_address2 command, you can
view the routing information in the specified destination address range.
Example
View the routing information of destination addresses ranging from 1.1.1.0 to
2.2.2.0.
<3Com> display ip routing-table 1.1.1.0 24 2.2.2.0 24
Routing tables:
Summary count: 3
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Interface
serial1/0/0
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Interface
serial2/0/0
display ip routing-table
ip-prefix
Syntax
display ip routing-table ip-prefix ip-prefix-name [ verbose ]
View
Any view
Parameter
■
ip-prefix-name: Prefix list name.
■
verbose: With the parameter, this command displays the verbose information
of both the active and inactive routes that passed filtering rules. Without the
parameter, this command displays the summary of the active routes that
passed filtering rules.
Description
Using the display ip routing-table ip-prefix command, you can view the route that
passed the filtering rule according to the specified ip prefix list.
If there is no specified prefix list, this command will display the verbose
information of all active and inactive routes with the parameter verbose and it will
display the summary of all active routes without the parameter verbose.