20
C
HAPTER
1: C
ONFIGURATION
C
OMMANDS
■
Access: Include the network diagnosis tool commands (
ping
,
tracert
),
commands for accessing an external device from local device (including Telnet
client, SSH client, RLOGIN), etc. Commands of this level cannot perform
configuration file saving operation.
■
Monitor: Commands used for system maintenance, service fault diagnosis and
so on, including the
display
and
debugging
commands. Commands of this
level cannot perform configuration file saving operation.
■
Configure: Service configuration commands, including routing commands and
commands of various network layers. Commands of this level provide direct
network services for users.
■
Manage: Commands related to basic system running and system support
modules. These commands provide support for various services. Commands of
this level include file system, FTP, TFTP, Xmodem download and configuration
file switchover commands, power control commands, standby board control
commands, user management commands, level setting commands, system
internal parameter setting commands (not being provided in protocols or RFC
documentation), etc.
To prevent unauthorized users from intruding the system, you must pass the
authentication when you are trying to switch from current user to a higher-level
user. This means that you must enter the password of the higher-level user (if
the
super password
[
level
user-level
] {
simple
|
cipher
}
line
command is
configured). For the sake of security, your entered password is not directly
displayed on the screen. If you enter the correct password within three times,
you will be able to switch to the higher-level user, or you will stay at current
level.
For the related command, see
super password
.
Example
<3Com> super 3
Password:
User privilege changes to 3 level, just equal or less this level's
commands can be used.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
super password
Syntax
super password [ level user-level ] { simple | cipher } password
undo super password [ level user-level ]
View
System view
Parameter
user-level
:
User level ranging from 0 to 3.
simple
: Configure simple text password.
cipher
: Configure cipher text password.
Summary of Contents for Router 3031
Page 6: ......
Page 686: ...686 CHAPTER 6 ROUTING PROTOCOL...
Page 758: ...758 CHAPTER 7 MULTICAST COMMON CONFIGURATION COMMANDS...