3Com Router 3031, Command Reference Manual

Page: 320 / 838

320 C
HAPTER
4: L
INK
L
AYER
P
ROTOCOL
Description
Using the mfr link-name command, you can set the frame relay bundle link
identification (LID). Using the undo mfr link-name command, you can restore the
default setting.
By default, LID is the name of the corresponding physical interface.
The peer equipment identifies a frame relay bundle link via LID or associates the
bundle link with a frame relay bundle by using LID. LID is locally valid; therefore,
the LIDs at both ends of a link can be the same.
When changing the bundle LID on an interface, you must execute the
shutdown/undo shutdown command on the interface to make the new bundle
LID valid.
For the related command, see mfr bundle-name.
Example
Set the bundle LID of the multilink frame relay bundle link Serial4/1/2 to be bl1.
[3Com-Serial4/1/2] mfr link-name bl1
mfr retry Syntax
mfr retry number
undo mfr retry
View
Frame relay interface view
Parameter
number: The maximum times that a bundle link can resend hello messages,
ranging from 1 to 5. By default, it is twice.
Description
Using the mfr retry command, you can set the maximum times that a frame relay
bundle link can resend hello message when waiting for a hello acknowledgement
message. Using the undo mfr retry command, you can restore the default setting.
If the times that a bundle link resends hello message reach the maximum without
receiving acknowledgement from the peer, the system will regard the link protocol
on the bundle link to be malfunctioning.
Only after the link-protocol fr mfr command is used to associate a frame relay
bundle link interface with a frame relay bundle, can this command be configured.
For the related commands, see mfr timer ack and mfr timer hello.