3Com Router 3031, Command Reference Manual

Page: 102 / 838

102 C
HAPTER
2: S
YSTEM
M
AINTENANCE
& M
ANAGEMENT
C
OMMANDS
Parameter
type-keyword: Type name of user-interface.
user-interface-number: The first user-interface to be configured.
ending- user-interface-number: The last user-interface to be configured.
Description
Using the user-interface command, you can enter the single-user interface view or
multi-user interface view.
Example
Enter the user-interface console 0 view to configure console 0.
[3Com] user-interface console 0
[3Com-ui-console0]
Enter the user-interface vty 0 view to configure vty 0.
[3Com] user-interface vty 0
[3Com-ui-vty0]
Enter the user-interface vty view to configure user-interfaces vtys 0 through 3.
[3Com] user-interface vty 0 3
[3Com-ui-vty0-3]
enter the user-interface view to configure user-interfaces 0 through 4, including
of console port type, of AUX interface type and of VTY interface type. The user
interface types will be configured depending on the configuration interface
available on the router.
The following example configures one console user interface and three VTY user
interfaces, which may be right for the case where the router does not provide the
AUX interface.
[3Com] user-interface 0 3
[3Com-ui0-3]
debugging
ntp-service
Syntax
debugging ntp-service { access | adjustment | authentication | event | filter | packet
| parameter | refclock | selection | synchronization | validity | all }
undo debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
View
User view