3Com Router 3031, Command Reference Manual

Page: 667 / 838

IP Routing Policy Configuration Commands 667
[3Com-bgp-af-mul] peer 20.10.0.1 enable
IP Routing Policy
Configuration
Commands
apply as-path Syntax
apply as-path as-number-1 [ as-number-2 [ as-number-3 ... ] ]
undo apply as-path
View
Routing policy view
Parameter
■
as-number-1... as-number-n: AS number to be added.
Description
Using the apply as-path command, you can specify AS number to be added in
front of the original AS path in route-policy. Using the undo apply as-path
command, you can cancel the AS sequence number added in front of the original
AS path.
By default, no AS number is set.
If the match condition of route-policy is matched, the AS attribute of the
transmitting route will be changed. At least 10 AS numbers can be added.
Example
Add AS 200 in front of the original AS path in route-policy.
[3Com-route-policy] apply as-path 200
apply community
Syntax
apply community { { { aa:nn | no-export-sunconfed | no-export | no-advertise} … [
additive ] } | additive | none }
undo apply community
View
Routing policy view
Parameter
■
aa:nn: Community number.
■
no-export-subconfed: Not sends the matched route outside AS.
■
no-advertise: Not sends the matched route to any peer.
■
no-export: Not passes route through AS but advertise to other sub Ass.
■
additive: Community attributes of additional routes.
■
none: Community attributes of deleted routes.