3Com Router 3031, Command Reference Manual

Page: 834 / 838

834 C
HAPTER
8: MPLS B
ASIC
C
ONFIGURATION
C
OMMANDS
View
Interface view
Parameter
bandwidth: The maximum link bandwidth at the interface, in the range of
0~32000000bps. By default, it is 75 percentage of the actual bandwidth at the
interface.
Description
Using the mpls te max-reservable-bandwidth command, you can configure the
reservable bandwidth at the interface. Using the undo mpls te
max-reservable-bandwidth command, you can restore the default value.
The maximum reservable bandwidth at an interface should be greater than the
sum of all tunnel bandwidth.
For related commands, see mpls te bandwidth.
Example
Set the maximum reservable bandwidth at an interface as 64kbps.
[3Com-Ethernet1/0/0] mpls te max-reservable-bandwidth 64
mpls te path
explicit-path Syntax
mpls te path explicit-path pathname
undo mpls te path explicit-path
View
Tunnel view
Parameter
path-name: Explicit path name.
Description
Using the mpls te path explicit-path command, you can configure explicit for a
tunnel. Using the undo mpls te path explicit-path command, you can delete the
route.
For related commands, see mpls te explicit-path.
Example
[3Com-tunnel1] mpls te path explicit-path 3Com
mpls te record-label Syntax
mpls te record-label
undo mpls te record-label
View
Tunnel view