3Com Router 3031, Command Reference Manual

Page: 831 / 838

MPLS TE Configuration Commands 831
Parameter
path-name: Path name
enable: Current path is available.
disable: Current path is unavailable. This setting prevents the path from being
used during configuration.
Description
Using the mpls te explicit-path command, you can enter the explicit path view and
create an explicit path or modify a specific path. The explicit is a list of IP
addresses, with each entry representing a node or a link. Using the undo mpls te
explicit-path command, you can delete a specified path.
By default, no explicit is specified.
For related commands, see mpls te path explicit-path.
Example
Enter the explicit path “3Com” view.
[3Com] mpls te explicit-path 3Com
mpls te
flooding-thresholds
Syntax
mpls te flooding-thresholds { down | up } percent [ percent ] ...
undo mpls te flooding-thresholds [ down | up ]
View
Interface view
Parameter
down: Reservable bandwidth values available in descending order
up: Reservable bandwidth values available in ascending order
percent: Threshold level for flooding, in percentage, in the range of 1~100. For
the up keyword: the values available include 15, 30, 45, 60, 75, 80, 85, 90, 95,
96, 97, 98, 99 and 100. For the down keyword, the values include 100, 99, 98,
97, 96, 95, 90, 85, 80, 75, 60, 45, 30 and 15.
Description
Using the mpls te flooding-thresholds command, you can define flooding
threshold. Using the undo mpls te flooding-thresholds te loop-detection
command, you can restore the default value.
If the reservable bandwidth available at the interface exceeds the preset threshold,
it will trigger link state update messages being distributed among the network.
Otherwise, the link state update messages are sent by flooding period.
For related commands, see mpls te timer periodic-flooding.