3Com Router 3031, Command Reference Manual

Page: 323 / 838

Frame Relay Configuration Commands 323
undo shutdown
View
Frame relay switching view
Description
Using the shutdown command, you can disable any current switching PVCs. Using
the undo shutdown command, you can enable any current switching PVCs.
By default, switching PVC is enabled.
Example
Disable all the current switching PVCs.
[3Com] fr switch pvc1 interface serial 1/0/0 dlci 100 interface
serial 2/0/0 dlci 200
[3Com-fr-switching-pvc1] shutdown
reset fr inarp Syntax
reset fr inarp
View
User view
Parameter
None
Description
Using the reset fr inarp command, you can clear the address mapping established
by inverse ARP.
In some special cases, for example, when the network architecture changes, the
dynamic address maps originally established will become invalid. hence it is
necessary to establish them again. Users can use this command to clear all the
dynamic address maps.
For the related command, see fr inarp.
Example
Clear all the Frame Relay dynamic address maps.
[3Com] reset fr inarp
timer hold
Syntax
timer hold seconds
undo timer hold