3Com Router 3031, Command Reference Manual

Page: 728 / 838

728 C
HAPTER
7: M
ULTICAST
C
OMMON
C
ONFIGURATION
C
OMMANDS
source-address: Source address of (S, G) entry. With no source address specified,
all the source information of the specified group will be displayed.
If neither group address nor source address is determined, all SA caches will be
displayed.
autonomous-system-number: Displays (S, G) entries from specified autonomous
system.
Description
Using the display msdp sa-cache command, you can view (S, G) state learnt from
MSDP peer.
Only cache-sa-enable command is configured, can cache state be displayed.
Example
<3Com> display msdp sa-cache
MSDP Total Source-Active Cache - 5 entries
(Source, Group) Origin RP Pro AS Uptime Expires
(10.10.1.2, 225.1.1.1) 10.10.10.10 BGP 100 00:00:10 00:05:50
(10.10.1.3, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.2.1, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.2.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
MSDP matched 5 entries
display msdp sa-count Syntax
display msdp sa-count [ autonomous-system-number ]
View
Any view
Parameter
autonomous-system-number: Number of sources and groups from the specified
autonomous system.
Description
Using the display msdp sa-count command, you can view the number of sources
and groups in MSDP cache.
The cache-sa-enable command must be configured before the configuration of
this command.
Example
<3Com> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group