3Com Router 3031, Command Reference Manual

Page: 355 / 838

LAPB and X.25 Configuration Commands 355
The above information indicates: the interface Serial0/0/0 is set without alias, and
the interface Serial1/0/0 is set with 3 aliases, which are $20112405$ (in strict
match mode), $20112405 (in left alignment match mode) and 20112405$ (in
right alignment match mode).
display x25
hunt-group-info
Syntax
display x25 hunt-group-info [ hunt-group-name ]
View
Any view
Parameter
hunt-group-name: hunt group name
Description
Using the display x25 hunt-group-info command, you can view the status
information of X.25 hunt group.
You can use this command to learn the hunt group of the Router and the
information about the interfaces and XOT channel inside the hunt group.
For the related command, see x25 hunt-group.
Example
Display the status information of X.25 hunt group hg1.
[3Com] display x25 hunt-group-info hg1
HG_ID : hg1 HG_Type: round-robin
member state vc-used in-pkts out-pkts
Serial0/0/0 Last 2 51 20
Serial1/0/0 Next 1 21 15
1.1.1.1 Normal 1 24 3
The following table introduces the meaning of each field in the displayed
information.
Table 19 Explanation of each field in the command display x25 hunt-group-info
Field Explanation
hg1 Hunt group name
round-robin Hunt group call channel selection policy
member Interfaces or XOT channel contained in hunt group
state The state of the current interface or XOT channel, including:
Last:Last: last used
Next: interfaces or XOT channel selected by rotary selection policy next
Normal: normal state
vc-used Call number on the interface or XOT channel (including call success and call failure)
in-pkts Input flow on the interface or XOT channel in packets
out-pkts Output flow on the interface or XOT channel in packets