3Com Router 3031, Command Reference Manual

Page: 683 / 838

Route Capacity Configuration Commands 683
You shall use the command cautiously.
For the related commands, see memory auto-establish enable, memory { safety |
limit }, and display memory limit.
Example
Disable to recover the connections of all the protocols automatically when the
current router memory resumes.
[3Com] memory auto-establish disable
[3Com]
%3/13/2003 15:47:2-RM-5-S1-RTLOG:You have changed the model of
connection
memory auto-establish
enable
Syntax
memory auto-establish enable
View
System view
Parameter
None
Description
Using the memory auto-establish enable command, you can resume connections of all the
routing protocols when the idle memory of the router recovers to a safety value.
By default, when the idle memory of the router recovers to a safety value, connections of all
the routing protocols will always recover (when the idle memory of the router reduces to a
lower limit, the connection will be disconnected forcibly).
Using the
memory auto-establish disable command, you can disable the above function.
Using the memory auto-establish enable command, you can enable the above function
again. By default, the function is always enabled.
For the related command, see
memory auto-establish disable , memory { safety | limit },
and display memory limit .
Example
Enable memory resume of the current router and recover connections of all the
protocols automatically.
[3Com] memory auto-establish enable
[3Com]
%3/13/2003 15:48:2-RM-5-S1-RTLOG:You have changed the model of
connection
memory limit
Syntax
memory limit limit-value
undo memory limit
View
System view