3Com Router 3031, Command Reference Manual

Page: 344 / 838

344 C
HAPTER
4: L
INK
L
AYER
P
ROTOCOL
pvc-group Syntax
pvc-group { pvc-name [ vpi/vci ] | vpi/vci }
undo pvc-group { pvc-name [ vpi/vci ] | vpi/vci }
View
ATM interface view
Parameter
pvc-name: PVC name, whose maximum length is 16 characters. It is case
insensitive and should be unique at ATM interface. And it shouldn't be legal
VPI/VCI pair. For example, "1/20" cannot be a PVC name. The PVC corresponding
to pvc-name must have already been created.
vpi/vci: vpi is ATM Virtual Path Identifier (VPI) in the range 0 to 255; vci is ATM
Virtual Channel Identifier (VCI). For its value range, refer to VCI range for each
type of ATM interface. Usually, the vci values from 0 to 31 are reserved for special
usage and cannot be used. PVC corresponding to vpi/vci must have already been
created.
Description
Using the pvc-group command, you can create a PVC-Group or enter the
PVC-Group view at ATM interface. Using the undo pvc-group command, you can
delete the specified PVC-Group.
Once pvc-name is specified for some PVC (e.g. "3Com"), it is possible to enter the
PVC-Group view by inputting pvc-group pvc-name (e.g. "pvc-group 3Com"). The
deletion of the PVC-Group can be done by inputting undo pvc-group pvc-name
(e.g. "undo pvc-group 3Com") or through the undo pvc-group vpi/vci (if the
VPI/VCI of this PVC is 1/32, it is " undo pvc-group 1/32") command.
For the related commands, see ip-precedence and pvc.
Example
Display how to create a PVC-Group based on the name "3Com" and the PVC
with VPI/VCI as 1/32.
[3Com-Atm1/0/0] pvc-group 3Com 1/32.
pvc max-number
Syntax
pvc max-number max-number
undo pvc max-number
View
ATM master interface view