3Com Router 3031, Command Reference Manual

Page: 715 / 838

PIM Configuration Commands 715
PIM mode is Sparse
PIM query interval is 30 seconds
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
Table 2 Description of output information of display pim interface command
display pim neighbor Syntax
display pim neighbor [ interface interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number.
Description
Using the display pim neighbor command, you can view the PIM neighbor
information.
Example
Display the PIM neighbor information of the interface Ethernet1/0/0 on the router.
<3Com> display pim neighbor ethernet 1/0/0
Neighbor's Address Interface Name Uptime Expires
10.10.1.10 Ethernet1/0/0 00:41:59 00:01:16
display pim
routing-table
Syntax
display pim routing-table [ *g [ group-address [ mask { mask-length | mask } ] ] [
incoming-interface { interface-name | null } ] [ dense-mode | sparse-mode ]
display pim routing-table [ **rp [ rp-address [ mask { mask-length | mask } ] ] [
incoming-interface { interface-name | null } ] [ dense-mode | sparse-mode]
display pim routing-table [ source-address [ mask { mask-length | mask } ] [
group-address [ mask { mask-length | mask } ] ] [ incoming-interface {
interface-name | null } ] [ dense-mode | sparse-mode ]
View
Any view
Parameter
**rp: (*, *, RP) route entry.
*g: (*, G) route entry.
group-address: Address of the multicast group.
Item Description
PIM is enabled on interface PIM SM is enabled on the interface Ethernet1/0/0.
PIM query interval is 30 seconds The sending interval of Hello message is 30
seconds.
PIM DR (designated router) is 10.10.1.20 IP address of DR is 10.10.1.20.