3Com Router 3031, Command Reference Manual

Page: 25 / 838

debugging 25
In case failures occur to the system, lots of information needs to be collected for
the convenience of isolating the problems. However, it is rather difficult for you to
collect all the information at a time as there are many display commands involved.
In this case, you can use the display diagnostic-information command to collect
the operating information of all the active modules in the system.
Example
Display the technical support information.
<3Com> display diagnostic-information
------------------ display version ------------------
3Com3Com Versatile Routing Platform Software
VRP 3600E Software Version VRPV3R001M06B03D003, DEBUG SOFTWARE
Copyright (c) 2000-2003 by VRP Team Beijing Institute 3Com Tech, Inc
Compiled Mar 24 2003 20:28:31 by zhaomin
------------------ display running-config ------------------
#
sysname 3Com
#
------------------ display history commands ------------------
display diagnostic-information
------------------ display tasks ------------------
ID Name Priority Status CPU Time
1 WEIL 10 Ready 10/20
2 SYST 180 Ready 0/7
3 XMON 140 Event Sem 0/0
4 VMON 140 Event Sem 41/41
5 INFO 100 Event Sem 1/6
6 co0 100 Ready 0/3178
7 LDP 100 Event Sem 1/299
8 LAGT 100 Queue Sem 0/1
9 Clon 100 Event Sem 0/0
10 ROUT 100 Event Sem 0/172
11 FIB 100 Event Sem 0/178
12 SOCK 100 Event Sem 0/47961
13 VTYD 100 Event Sem 0/25
14 IPSP 100 Event Sem 0/537
15 IKE 100 Event Sem 1/20
16 RSA 100 Event Sem 1/94
17 RDUS 100 Delay 1/1574
18 L2TP 100 Event Sem 0/14
19 TNLM 100 Event Sem 0/0
20 AGNT 100 Event Sem 0/4904
21 TRAP 100 Queue Sem 0/0
22 MDMT 100 Queue Sem 0/3
23 NTPT 100 Delay 0/7
24 PIMT 100 Delay 0/7
25 CFM 100 Queue Sem 363/1355
26 LSPM 100 Delay 0/414
27 L2V 100 Delay 0/6
28 VRRP 100 Event Sem 0/0