3Com Router 3031, Command Reference Manual

Page: 153 / 838

Interface Management Commands 153
Note that executing the undo interface command also deletes the defined logical
interfaces (such as dialer, tunnel, and virtual-template interfaces) and
subinterfaces.
Example
Enter the Ethernet interface view in system view.
[3com]interface ethernet 0/0/0
[3com-Ethernet0/0/0]
Switch from Ethernet0 view to the view of the subinterface Serial0/0/0.1.
[
3com
-Ethernet0/0/0]interface serial0/0/0.1
[
3com
-Serial0/0/0.1]
reset counters interface
Syntax
reset counters interface [ type number ]
View
User view
Parameter
type: Interface type which is used along with number for identifying an interface.
number: Interface number which is used along with type for identifying an
interface.
Description
Using the reset counters interface command, you can clear the statistics of the
transmitted and received packets on an interface.
If no interface has been specified, the statistics about the transmitted and received
packets on all the interfaces are cleared.
To count the traffic size on an interface within a specific period, you must clear the
existing statistics about the transmitted and received packets on the interface
before taking a new count.
For a related command, see display interface.
Example
Clear the statistics about the transmitted and received packets on Serial 0/0/0.
< 3com > reset counters interface serial 0/0/0
shutdown Syntax
shutdown
undo shutdown