3Com Router 3031, Command Reference Manual

Page: 403 / 838

ARP Configuration Commands 403
By default, all the ARP entries of the RSU are displayed.
For the related commands, see arp static and reset arp.
Example
Display all static ARP entries.
<3Com> display arp static
IP Address MAC AddressType Vrf NameInterface
129.102.0.100e0-fc01-0000S
10.110.28.4400e0-fc07-5b2bIEth0/0
reset arp
Syntax
reset arp [ all | dynamic | static | interface { interface-type interface-number |
interface-name } ]
View
User view
Parameter
■
static: Indicates to clear the static ARP entries.
■
dynamic: Indicates to clear the dynamic ARP entries.
■
all: Indicates to clear all ARP entries.
■
interface: Indicates the selected interface.
■
interface-type: Interface type.
■
interface-number: Interface sequence number.
■
interface-name: Interface name.
Description
Using the reset arp command, you can clear the ARP entries in the ARP mapping
table.
By default, if slot-number is not specified, the operation will be performed upon
RSU board.
When operation is performed to the interface with specified interface, the
interface type can only be Ethernet, GE or virtual Ethernet and only the dynamic
entries can be deleted on the interface.
For the related commands, see arp static and display arp.
Example
The following example shows how to delete the dynamic entries in the ARP
mapping table on Ethernet 0/0/0.
<3Com> reset arp interface Ethernet 0/0/0