3Com Router 3031 Command Reference Manual Download Page 151

Page: 151 / 838

Interface Management Commands

151

■

IP address of the interface

■

The encapsulated link layer protocol of the interface and the running state of
the link layer protocol and the statistics.

■

Statistics of the incoming and outgoing packets on the interface

For a related command, see reset counters interface.

Example

View the running state and the relevant information of Serial 0/0/0.

[3com]display interface serial 0/0/0

Serial0/0/0 is up , line protocol is up

Description : 3Com Router, Serial0/0/0 Interface

The Maximum Transmit Unit is 1500, The keepalive is 10(sec)

Internet protocol processing : disabled

Link layer protocol is PPP

LCP opened, MPLSCP stopped

FIFO queuing: (Outbound queue:Size/Length/Discards)

FIFO: 0/75/0

Physical layer is synchronous,Baudrate is 64000 bps

Interface is DCE, Cable type is V35

5 minutes input rate 0.56 bytes/sec, 0.04 packets/sec

5 minutes output rate 0.66 bytes/sec, 0.05 packets/sec

51 packets input, 640 bytes, 0 no buffers

55 packets output, 700 bytes, 0 no buffers

0 input errors, 0 CRC, 0 frame errors

0 overrunners, 0 aborted sequences, 0 input no buffers

DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP

Table 1

Description of the displayed interface information

interface

Syntax

interface type number [ .sub-number ]

undo interface type number [ .sub-number ]

Field

Description

Serial0 is up

Physical layer state of the interface

line protocol is up

Link layer state of the interface

5 minutes input rate

The input rate of the interface within the last
five minutes

5 minutes output rate

The output rate of the interface within the
last five minutes

FIFO queueing: FIFO

Type of the output queue on the interface

51 packets input, 640 bytes, 0 no buffers

Packets and bytes received by the interface
and the packets discarded due to the
unavailability of receive-buffer.

55 packets output, 700 bytes, 0 no buffers

Packets and bytes sent by the interface and
the packets discarded due to the
unavailability of send-buffer.

input errors:0, CRC:0, frame errors:0

The received packets that contain errors,
including CRC errors and frame errors.

DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP

States of the physical electric signals DCD,
DTR, DSR, RTS, and CTS

Summary of Contents for Router 3031







































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Router 3031

Reviews:

Related manuals for Router 3031

Brands by name

Popular brands

3Com Router 3031, Command Reference Manual

Search results

Summary of Contents for Router 3031

Reviews:

Related manuals for Router 3031

Brands by name

Popular brands