3Com Router 3031, Command Reference Manual

Page: 506 / 838

506 C
HAPTER
5: N
ETWORK
P
ROTOCOL
Description
The reset ipx routing-table statistics command is used to clear the statistical
information of a specified type of IPX route. Such information can be shown upon
the terminal using the display ipx routing-table statistics command.
Example
Add 5 IPX static routes to the router, then delete them, and then add anther 9 IPX
static routes. The IPX route statistical information would be as follows:
[3Com]dis ipx routing-table statistics
Routing tables:
Proto/State route active added deleted freed
Direct 1 1 1 0
0
Static 9 9 14 5
5
RIP 0 0 0 0
0
Default 0 0 0 0
0
Total 10 10 15 5
5
[3Com]
Clear the IPX static route.
<3Com>reset ipx routing-table statistics protocol static
This will erase the specific routing counters information.
Are you sure?[Y/N]y
<3Com>
The displayed statistical information shows that all three items (add, delete, freed)
of static route have changed to 0, and the below Total item has also changed
accordingly.
<3Com>dis ipx routing-table statistics
DLSw Configuration
Commands
bridge-set (in
synchronous serial
interface view)
Syntax
bridge-set bridge-set-number
undo bridge-set bridge-set-number
View
Synchronous serial interface view