3Com Router 3031, Command Reference Manual

Page: 597 / 838

OSPF Configuration Commands 597
Description
Using the snmp-agent trap enable ospf command, you can enable the TRAP
function of OSPF. Using the undo snmp-agent trap enable ospf command, you can
disable the TRAP function.
This command takes no effect on the OSPF process enabled after its execution.
By default, no OSPF process is enabled to transmit TRAP packets.
For detailed configuration of SNMP TRAP, refer to “system management” section
in this manual.
Example
Enable TRAP function of OSPF process 100.
<3Com> snmp-agent trap enable ospf 100
spf-schedule-interval Syntax
spf-schedule-interval interval
undo spf-schedule-interval
View
OSPF view
Parameter
■
Interval: SPF calculation interval of OSPF, which is in seconds in the range of 1
to 10. The default value is 5 seconds.
Description
Using the spf-schedule-interval command, you can configure the route calculation
interval of OSPF. Using the undo spf-schedule-interval command, you can restore
the default setting.
According to the Link State Database (LSDB), the router running OSPF can
calculate the shortest path tree taking itself as the root and determine the next
hop to the destination network according to the shortest path tree. By adjusting
SPF calculation interval, network frequently changing can be restrained, which
may lead to that too many bandwidth resources and router resources will be used.
Example
Set the OSPF route calculation interval of 3Com to 6 seconds.
[3Com-ospf-1] spf-schedule-interval 6
stub Syntax
stub [ no-summary ]
undo stub
View
OSPF area view