3Com Router 3031, Command Reference Manual

Page: 91 / 838

User Interface Configuration Commands 91
* 0 CON 000:00:00
* 1 VTY 000:00:0910.110.101.39dd
Where,
*: Terminal line in use.
UI: The first number and the second number are respectively the absolute number
and relative number of user interface.
Username: Display the name of the user using this user-interface, namely the
username that the user uses for accessing. As AAA authentication is unavailable
yet, this item is null so far.
Delay: In minutes, it is the interval since the last input made by the user.
IP address: Displays the starting connection location, namely, IP address of the
call-in host.
flow-control
Syntax
flow-control { hardware | software | none }
undo flow-control
View
User interface view
Parameter
none: No flow control.
software: Software flow control.
hardware: Hardware flow control , only be effective to AUX port.
Description
Using the flow-control command, you can configure flow control mode. Using the
undo flow-control command, you can restore the default flow control mode.
By default, none mode is used, that is, there is no flow control.
The configuration can become effective only when the involved serial interface
works in the asynchronous flow mode.
When system is outputting, pressing <Ctrl+s> will stop the screen output, and
<Ctrl+q> will resume the screen output.
Example
Configure software flow control in user interface view.
[3Com-ui-console0] flow-control software