P. 5
nanobox | tangerine User Manual
Dec 11, 2023
EDITING PAD POSITION PARAMETERS
Open the Pad Position Parameters Screen
EDITING PAD POSITION PARAMETERS IN SAMPLE MODE
Set Start and End Points in Sample Pad Mode
Editing the Sample Start and Length in the Pad Position Parameters Screen
Editing the Sample Start and Length in the Waveform Screen
Enable Looping in Sample Pad Mode
Set Up Loops in Sample Pad Mode
Edit Loop Points in the Position Parameters Screen
Edit Loop Points in the Waveform Screen
Applying Loop Fade to Create Smoother Loops
Save Samples with Embedded Position Parameters
EDITING PAD POSITION PARAMETERS IN SLICER MODE
Defining Slices in the Waveform Screen
Manually Create or Remove Slices
Use Auto Scan to Create Slices:
Use Slices to Synchronize Playback of Clip Pads
Position Parameters in Slicer Mode
EDITING PAD POSITION PARAMETERS IN CLIP MODE
Position Parameters in Clip Mode
Configuring Loops in Clip Pad Mode