Setting the MIDI GlobIn Channel
1.
Navigate to the nanobox Configuration page:
a.
Push the Left Arrow button. The nanobox Configuration page opens.
2.
Use the tangerine’s knobs to scroll down to the MIDI GlobIn parameter and set it to
Omni.
3.
Push the Right Arrow button to return to the PADS HOME page.
4.
Verify you can trigger each pad over MIDI by playing the corresponding note on your
controller. The following figure shows the default notes mapped to each pad.
Note
: If you are unable to trigger a pad from its default note, check the pad’s Pad Note
parameter. If the Pad Note parameter is not “Default,”its value indicates which note to play
instead of the default mapped note.
Pad 1
C2
36
Pads MIDI Mapping
P. 119
nanobox | tangerine User Manual
Dec 11, 2023
