P. 71
nanobox | tangerine User Manual
Dec 11, 2023
Set Start and End Points in Sample Pad Mode
You can configure the start and end points for single-sample pads in Sample Pad Mode by
editing the following Pad Position parameters:
Editing the Sample Start and Length in the Pad Position Parameters Screen
1.
From the pad’s Macro screen, touch Pos to open the Pad Position Parameters screen.
2.
Check the Pads icon in the top left of the screen to verify you are editing the correct
pad. If necessary, step through the pads with the Layers button until you reach the
correct pad.
3.
Edit the sample Start and Length parameters, using the top knob to select each
parameter, and the bottom knob to change its value.
4.
Listen to how the sample changes while you adjust the sample’s start point and
length. Play the pad over MIDI or by touching the play button at the top of the
screen.
Parameter
Description
Range of Values
Start
Point where playback will begin when
playing forward or ends when playing in
reverse. Expressed as a sample number.
0 to number of samples in
the file
Length
When Loop Mode is None, how long the
sample will play past the value of the
Start parameter. Expressed in samples.
0 to number of samples in
the file
