manualshive.com logo in svg

1010 Music nanobox tangerine, User Manual


Share
Download
background image

ABOUT PRESETS 

The sounds and sequences in the tangerine are organized into Presets. Presets hold all of the 
Pad, Mixer, FX and Sequence settings together in one place. There are 80+ factory Presets 
loaded on the microSD card. You can customize these and save your changes in place of the 
original preset or as a new preset. You can also create your own presets. You are limited only by 
the space available on the microSD card.

Each preset holds:

•  Pad settings, including pointers to WAV files on the microSD card
•  Mixer settings
•  FX sends
•  FX parameters
•  Sequences and their settings
•  Default sequence selection
•  Modulation settings

You can edit existing presets or create your own presets, rename them and delete the ones 
you no longer want. You can choose to Save the current settings into the same preset, or to 
Save As a new preset. 

Presets are only saved when you choose to save them. This means you can load a preset, edit 
it, and quickly revert to the original settings simply by re-loading it from the microSD card. 

P. 18

nanobox | tangerine User Manual

Dec 11, 2023

Note:

■  Presets are not automatically saved. When you switch presets or power 

down the nanobox, any unsaved changes will be lost. 

Summary of Contents for nanobox tangerine










































































































































Reviews:

No comments

Related manuals for nanobox tangerine

Brands by name

Popular brands

Load more brands