P. 123
nanobox | tangerine User Manual
Dec 11, 2023
MODULATING PAD PARAMETERS OVER A PAD SPECIFIC MIDI
IN CHANNEL
Some tangerine Pad parameters can be modulated by MIDI Channel messages, such as
Mod Wheel, Note-On, and Pitch-bend messages.
Pad Parameter Modulation settings are Pad-specific, so your MIDI controller must be
configured to send these MIDI CCs on the MIDI channel that matches the Pad’s MIDI In
channel (Pads Configuration page).
For details on the parameters that can be modulated by MIDI channel message, see
Applying Modulation to Pad and Effect Parameters.
Note:
The MIDI In channel only supports the modulation of pad parameters, but not the
direct control of pad parameters. To control individual pad parameters, you can configure
your MIDI controller to send a set of pre-assigned continuous controllers on the tangerine’s
global CC In channel. The tangerine will ignore the pre-assigned CCs if your MIDI controller
sends them on any other channel. For details, see Controlling Pad Configuration
Parameters Over the GlobIn MIDI Channel.
LFO Depth Modulation Sources
MIDI In Channel Parameter in Pad Configuration Page
