Position Parameters in Slicer Mode
The parameters in the table below and on the next screen apply to Slicer mode.
Parameter
Description
Range of Values
Mod
Target
Loop Mode
Controls whether the slice playback is looped.
This does not work with Launch Mode of Trigger.
Use Launch Mode of Gate or Toggle if you want to
loop slices.
ON
,
OFF
No
PlayThru
Controls whether or not playback continues
through the end of the slice.
ON
– playback will
continue past the end
of the slice to the end
of the file.
OFF
– playback will
stop at the end of the
triggered slice.
No
Beat Count
Enter the number of beats in the clip file to give
tangerine more information to work with when
synchronizing playback to the current BPM. If set
to Auto, tangerine will attempt to detect the beat
count automatically. Only used when Sync is set
to ON.
Auto
,
1
to
512
No
Quant Size
Use Quant Size to quantize when the playback
starts and stops. Quantization will cause playback
to snap to a musical grid with intervals specified
by the Quant Size parameter. When quantization
is used, the note trigger will cause playback to
start and end on the next quant size boundary.
For example, if the Quant Size is set to 1-bar and
you press the pad, the playback will begin at the
start of the next bar.
None
- always start
and stop immediately
1/64, 1/32T, 1/32, 1/16T,
1/16, 1/8T, 1/8, 1/4T, 1/4,
1/2T, 1/2, 1 bar, 2 bars.
Assumes 4/4 time.
No
Sync
The Sync feature prevents timing drift that can
occur when the length and BPM of a clip does
not align exactly with the tempo of playback.
When Sync is used, tangerine will realign the
audio to match the clock at the step size
specified here.
OFF
– playback will
occur at the original
rate. Looping will
happen as soon as the
sample ends.
ON
– tangerine will
synchronize the
playback of the slice.
No
P. 82
nanobox | tangerine User Manual
Dec 11, 2023
