P. 108
nanobox | tangerine User Manual
Dec 11, 2023
Modulation indicators also appear in the global FX1: Delay and FX2: Reverb pages.
The following table describes MIDI continuous controller mappings for FX1: Delay and FX2:
Reverb parameters.
Table: Effects Modulation Sources
For details on the Delay and Reverb effect parameters, see "Adjusting Delay and Reverb
Effects.
ACCESSING PARAMETER MODULATION SETTINGS
Each configuration parameter that can be modulated has its own modulation page that
contains its modulation settings. To access the modulation parameters for a parameter,
select it, then push the Right Arrow button.
For example, to access the filter cutoff modulation page, select the Filter parameter, then
press Right Arrow to open the MOD: Filter page.
Opening the Filter MOD Page
Each Modulation page contains parameters for configuring up to three modulation
sources, each with a corresponding modulation Amount. If a Source parameter is set to
“None” the corresponding Amount parameter is 0% and gray to indicate that it is inactive.
Effect Parameter
Page
Delay Time
FX1: Delay
Feedback
FX1: Delay
Cut-off
FX1: Delay
Decay
FX2: Reverb
Predelay
FX2: Reverb
Damping
FX2: Reverb
