P. 120
nanobox | tangerine User Manual
Dec 11, 2023
Try This: Change the MIDI Notes That Trigger Pads
1.
Make sure your MIDI controller is set to the GlobIn channel.
2.
In the Pads Home screen, push the Right Arrow button. The Pad Macro page opens.
3.
Touch Config. The Pad Configuration page opens.
4.
Scroll down to the last parameter, Pad Note, with the top knob or touch-sensitive
screen.
5.
Note the Pad Note value is “Default,” then look up the default Pad Note for this pad
in the table on the previous page (for example, C2 or note number 36 for Pad 1).
6.
Play the Default Pad Note for that note on your MIDI controller to verify that you can
trigger the pad.
7.
Change the pad’s Pad Note to a note outside of the range of default Pad Notes, less
than 36 or higher than 43.
8.
Verify that you can trigger the pad over MIDI with the new Pad Note and that the
default Pad Note no longer works.
Note
: The Pad Note value is part of the pad configuration. If you load another preset, the
pads may have different Pad Note settings.
