manualshive.com logo in svg

1010 Music nanobox tangerine, User Manual


Share
Download
background image

SELECTING SEQUENCES

You can select sequences for playback or recording on the Sequence Home screen.  Here, 
you can also access sequence management tools for copying, pasting, and clearing 
sequences and for undoing the most recently recorded notes. 

Open the Sequence Home Screen

Push the Home button twice from the Pads Home screen to open the Sequence Home 
screen.

Many of the presets on the tangerine’s factory microSD include include demo sequences. 
You can tell if a preset includes sequences by looking for pad grid indicators under the 
names of the sequences (S1 to S16). 

The tangerine plays one sequence at a time. 

CLOCK

Touch to open the 

Transports pop-up.

SEQUENCE MENU

Touch to open the Sequence 

Management Menu.

SELECTED 

SEQUENCE

Touch a thumbnail to 

select which sequence 

will playback and  

capture new 

recordings.

SEQUENCE 

THUMBNAILS

See which pads 

are used in each 

sequence.

P. 41

nanobox | tangerine User Manual

Dec 11, 2023

Summary of Contents for nanobox tangerine










































































































































Reviews:

No comments

Related manuals for nanobox tangerine

Brands by name

Popular brands

Load more brands