manualshive.com logo in svg

1010 Music nanobox tangerine, User Manual


Share
Download
background image

P. 54

nanobox | tangerine User Manual

Dec 11, 2023

Accessing the Level and Pitch Parameters over MIDI

MIDI controllers can send Continuous Controller (CC) messages that change the Level and 
Pitch parameters directly, with the same results as turning the controls in the Pad Macro 
screen. The tangerine has a set of CC numbers reserved for eight sets of pad parameters, 
one set for each pad. 

The tangerine lets you send these CC messages over a MIDI channel of your choice. All that 
the tangerine needs to receive the reserved CCs is the chosen channel number configured 
in its CC In parameter in the nanobox Configuration screen.

This makes it relatively simple to configure a MIDI controller as a user interface for editing 
any or all eight tangerine pads. 

For more details on adjusting the filter cut-off and resonance over MIDI, see “Controlling 
The nanobox | tangerine Over MIDI”  on page 114. 

Summary of Contents for nanobox tangerine










































































































































Reviews:

No comments

Related manuals for nanobox tangerine

Brands by name

Popular brands

Load more brands