P. 52
nanobox | tangerine User Manual
Dec 11, 2023
7.
As you tap the Pad Trigger, adjust the four parameters to hear their effect. You can
tap and drag any of the onscreen knobs directly, or you can tap to select a pair of
them, and then turn the top and lower knobs adjust the top and lower onscreen
knobs.
The position of the rectangular orange Focus Ring indicates which pair of
parameters is currently selected.
The following table describes each of the four visible parameters.
Table: Pad Macro Controls
These parameters also appear in the Configuration Parameters screen along with
many other pad-specific parameters. The four on-screen knobs in the Macro screen
are convenient for making changes quickly while playing.
Knob
Description
LEVEL
Adjust the volume of the current pad. Range: -96dB to +12dB.
Also available on the Conf parameter screen, where you can apply
internal modulation. There is a MIDI CC mapping for level for each
pad.
PITCH
Adjust the pitch in a range of +/- 2 octaves. This is not quantized to
semitones. Also available on the Conf parameter screen, where
you can apply internal modulation. There is a MIDI CC mapping
for pitch for each pad.
FILTE
Apply a high pass (to the right) or low pass (to the left) filter to the
pad. There is a MIDI CC mapping for filter for each pad.
RES
The Resonance amount to control the shape of the frequency
response near the cutoff frequency.
